NPN processing time is the question most brand owners ask once the formula is set: how long until Health Canada issues the licence and the product can ship? The honest answer depends on the class of your application. A monograph-based product can clear in about two months, while a product that needs a full evidence review can take seven months or longer.

That spread matters, because no natural health product can be sold in Canada without a product licence. So the licence date, not the production date, usually sets your launch date. This guide covers Health Canada's published service standards, what actually slows a file down, and how to build a launch plan that absorbs the wait.
Key Takeaways
- Health Canada's service standard is 60 days for Class I, 90 days for Class II and 30 plus 180 days for Class III applications.
- Class I and II files usually meet the standard, but Class III files met it only about half the time in 2022 to 2023.
- Class II and III files now need a Workload Management Form shortly after acknowledgement, or they lose priority.
- Information Request Notices, missing evidence and the wrong class choice are the most common causes of delay.
- Plan the launch backwards from the expected licence date, and keep label printing until the NPN is issued.
NPN Processing Time by Licence Class
Health Canada sorts every product licence application into one of three classes. The class reflects how much of the file a reviewer must actually assess. As a result, it is the single biggest driver of NPN processing time.
Class I covers compendial applications. Here, the product matches a Health Canada monograph exactly, so the reviewer checks the attestation rather than the evidence. The service standard is 60 calendar days.
Class II covers products that rely on pre-cleared information, for example a labelling standard or a traditional or non-traditional claim with limited extra review. The standard is 90 calendar days.
Class III covers everything else, including new claims, new dosages and combinations without a matching monograph. These files go through a 30-day screening step and then a 180-day full assessment. In total, that means about 210 calendar days of NPN processing time.
You can confirm the current figures on Health Canada's service standards page for NHP application reviews. For a refresher on what the eight-digit number itself means, see our guide to what an NPN number is.
Service Standards Versus Real-World Timelines
A service standard is a target, not a guarantee. Health Canada aims to finish 90% of submissions within the standard. In practice, results differ sharply by class.
For fiscal year 2022 to 2023, Health Canada reported 98.4% of Class I and 94.9% of Class II applications finished on time. In contrast, only 55.6% of Class III applications met the standard. In other words, Class I and II dates are fairly predictable, but a Class III date needs a buffer.
Here's what that means in practice: if your formula needs a Class III review, plan for longer than 210 days. A buffer of two to three extra months is a sensible starting point. It also keeps the launch from slipping when the licence arrives late.
How Workload Management Changes the Queue
Until 2025, Health Canada reviewed applications on a first-come, first-served basis. However, a rise in application volume led to a new approach. Since March 5, 2025, Class III files follow workload management criteria. Class II files joined the same system on June 9, 2025.
Under these rules, Health Canada focuses on products that will be sold or manufactured in Canada within six months of licensing. To claim priority, the applicant files a Workload Management Form after the acknowledgement letter arrives. The deadline is 15 calendar days for Class III and 7 calendar days for Class II.
This is where most brands run into trouble. If nobody files the form, the submission drops to the back of the queue. Health Canada reviews deprioritized files only when it has capacity, so the published standard no longer applies to them. Class I files still move in order of receipt.
What Slows NPN Processing Time
Most delays come from the file itself rather than from the queue. The common causes are well known, so you can avoid most of them before you submit.
Information Request Notices. When a reviewer finds a small gap, Health Canada sends an Information Request Notice (IRN). The notice sets a short response window. A late or incomplete answer can lead to a refusal, which means starting again. For example, since mid-2026 Health Canada no longer asks for finished product specifications up front with Class II and III files. Instead, it requests them through an IRN when needed, so have them ready anyway.
Weak or mismatched evidence. A claim that goes beyond what the cited sources support will draw questions or a refusal. Our post on NHP evidence requirements covers what reviewers expect.
The wrong class. An application filed as Class I that deviates from the monograph, even on dose or duration, will not clear as Class I. Similarly, an extra non-monograph claim can push a product into Class III.
Administrative errors. Missing site information, wrong forms or mismatched ingredient names can stall a file at screening. Therefore, a careful pre-submission check usually saves more time than any other step.
Planning a Launch Around NPN Processing Time

The practical move is to plan backwards from the expected licence date. Start with the class, add the service standard, then add a buffer that matches the class. For instance, a Class I file might get two weeks of buffer, while a Class III file might get three months.
Next, run the other workstreams in parallel. Formulation, ingredient sourcing, packaging selection and pilot batches can all progress while the file sits in review. Our walkthrough of the NHP product licence application process shows where each piece fits.
However, keep a few steps until after the licence arrives. The NPN must appear on the label, so final label printing waits for it. In addition, the licence may come back with wording changes to the claim, dose or cautions. Approving artwork early often means paying to reprint.
Finally, choose the class on purpose. If speed matters more than a unique claim, building the product around an existing monograph can cut NPN processing time from seven months to two. That trade-off is worth discussing with your contract manufacturer at the formulation stage.
The Short Version
NPN processing time runs from about 60 days for a monograph match to 210 days or more for a full Class III review. Class I and II files usually land on schedule, while Class III files often run late. So the best protection is a clean file, the right class, a timely Workload Management Form and a launch plan with room to absorb a delay.
If you are mapping a new herbal product and want to align production with your licence timeline, get in touch to talk through formats, batch sizes and timing.
Published: November 6, 2026
